Sometimes users note that with some time the out of Windows on their computer become slower or the operating system ceases to properly shut down. Here are few reasons for this “strange” behavior.

The computer is not a lamp and to properly shut down, it is not enough to simply click a toggle switch. Shut down of a computer is a complicated procedure. Sometimes it often takes too long in Windows, it also happens that Windows does not close at all.

The frequent reason for this behavior of the operating system is a software bug in the driver. Therefore, first of all, it is worth visiting the Web sites of manufacturers of hardware – from those devices that you have installed the latest – and check to see if there are new drivers for them.

Slow shutdown
At the beginning let’s consider the relatively simple case: the system shuts down properly, but very slowly. One common cause of Windows 2000 and XP “slowness” in such cases may be the work of Terminal Services. If you need them nothing to be done, you will have to endure. But if terminal services are installed by default, but you will never use any remote desktop or fast user switching or remote service, or a terminal server or other services from the category of Terminal Services, you can disable them. To do this, click Start> Run (Start> Run), type services.msc and press Enter. Then in the next window in the list of line Terminal Services and double click on it. (If this line isn’t there the terminal services in the operating system are installed, and the reason for the slow off is the other.) Change the Startup type on the Disabled or Manual and click OK.

Besides, you can accelerate off the Windows 2000 and XP, refusing to clear the virtual memory when you exit your operating system. This mode is quite useful, though not enabled by default. Click Start> Run (Start> Select), type gpedit.msc and press Enter. In the new window, similar to Windows Explorer go to the left pane, under Computer Configuration \ Windows Settings \ Security Settings \ Local Policies \ Security Options. In the right pane, locate the line Shutdown: Clear virtual memory pagefile. If this option is enabled, double-click on this line, click Disabled and click OK (if your computer has that option).

Actually, the more programs running before disabling Windows (including background), the longer it takes the operating system to shut down each of them before closing itself. Part of this work you can do yourself, close all windows before shutting down the computer.

Crashing shutdown
More serious case is when Windows does not just slowly closes and hangs at shutdown or other shows, such as unpleasant “tricks.”

Sometimes errors if disable Windows XP fixes after you install Service Pack 1.
If Windows is locked, but the computer remains on, and the message that it can be turned off doesn’t appear on the screen saver the cause of the problem lies in the power management Advanced Power Management (APM). The only question is, where it is: in Windows itself, or in setting up the hardware? Better to start with Windows: Right-click on the desktop and choose Properties. Click the tab Screen Saver and click on Power. In Windows 98 and Me, this button called Settings and is located in the section Energy saving. Tab APM (if that tab is absent, then the problem lies in the hardware configuration). Turn on Enable Advanced Power Management Support and click OK.

You should restart the computer and open the program Setup, by pressing the appropriate key during boot to check the hardware configuration. Locate the menu include APM or ACPI (Advanced System Configuration and Power Interface).
If the computer running Windows 2000 or XP, restarts instead of shut down the problem may be in the system fails. In response to system failures these versions of Windows are restarted, so it sometimes seems that the operating system is confusing off with reset. In order to discover the cause of the problem click the right-mouse button on the icon for My Computer and choose Properties. Click the tab Advanced. In Windows XP, click the Settings under Startup and Recovery, disable the Automatically restart and then close all the windows by pressing OK. In Windows 2000, click Startup and Recovery, disable the Automatically reboot and then close the settings window. Now you do notice that it does not shut down Windows quietly, and perhaps find a way out.

Your computer can get into serious problems if you do not pay attention to the regular update of the drivers. And this is where driver updater can save you much time.

We would like to give you some general tips – today the Internet technologies give you a really unique chance to choose what you need for the best price on the market. Strange, but most of the people don’t use this chance. In real practice it means that you should use all the tools of today to get the info that you need.

Search Google and other search engines for the topic of “driver reviver“. Visit social networks and check the accounts that are relevant to your topic. Go to the niche forums and participate in the discussion. All this will help you to build up a true vision of this market. Thus, giving you a real chance to make a wise and nicely balanced decision.

And also sign up to the RSS on this blog, because we will everything possible to keep this blog tuned up to the day with new publications about the market of drivers and slow computer solutions.

Tags: , , , ,